Electric Water Mist Firefighting Robotic Dog Fine Water Mist Module with Long Spray Distance

The Electric Water Mist Firefighting Robotic Dog integrates a fine water mist module with a high-mobility quadruped platform, delivering long spray distance and reliable fire suppression in complex environments. Engineered for industrial and emergency response applications, it combines certified legged-robot performance with advanced sensing, all-terrain mobility, and IP67 protection.

• Standard compliance: Conforms to GB/T 44251-2024 "Legged Robot Performance and Test Methods." A third-party test report is provided by an institution qualified for this standard, bearing the CMA mark and the manufacturer's official seal (fresh seal). The institution's authorized capability range table or official website screenshot covering GB/T 44251-2024 is also supplied.
• Standing dimensions: ≤ 900mm × 500mm × 600mm.
• Total weight (including battery): ≤ 40kg.
• Stable working load: ≥ 25kg.
• Battery capacity: ≥ 20AH 54V.
• Degrees of freedom: 16 total; 3 + 1 per single leg (wheel-legged configuration). Third-party CMA test report and manufacturer-sealed certification provided, with authorized capability range covering GB/T 44251-2024.
• Battery life: ≥ 4 hours empty load; ≥ 2 hours full load.
• Maximum walking speed: 4m/s.
• Wheel-legged limiting speed: 8m/s. Third-party CMA test report and manufacturer-sealed certification provided, with authorized capability range covering GB/T 44251-2024.
• Maximum slope angle: ±45°. Third-party CMA test report and manufacturer-sealed certification provided, with authorized capability range covering GB/T 44251-2024.
• Maximum obstacle clearance height: 80cm. Third-party CMA test report and manufacturer-sealed certification provided, with authorized capability range covering GB/T 44251-2024.
• Maximum gully crossing width: 80cm.
• Barrier crossing under rated load: Height ≥ 50cm; barrier thickness ≤ 10cm.
• Maximum stair climbing step height: 22cm.
• Expansion power supply interface: 5V, 12V, 24V, 48V; power supply capacity ≥ 480W.
• Dual battery system: Supports dual batteries with quick disassembly and replacement, hot swapping enabled for immediate plug-and-play without stopping the machine.
• Communication interfaces: Gigabit network ports × 2, USB 3.0 × 2, serial port × 1.
• Protection modes: Soft and hard emergency stop protection; low battery alarm and over-temperature alarm.
• Movement functions: Stepping, sliding, crawling and other postures; linear movement forward, backward, left and right; on-the-spot rotation; knee joint posture transformation. Automatic recognition of slopes, stairs and other terrain, with walking capability on gravel, asphalt, grassland, sandy ground, forest ground and construction ruins. Third-party CMA test report and manufacturer-sealed certification provided, with authorized capability range covering GB/T 44251-2024.
• Anti-interference ability: Adjusts posture to maintain balance and avoid falling upon impact; automatically recovers to standing position after a fall.
• Charging methods: Supports manual charging and automatic charging.
• Wheel/foot switching: Supports wheel-foot and point-foot replacement.
• Front and rear switching: Equipped with front and rear vision; supports on-the-spot turning around.
• Environmental parameters: Working temperature −20℃ to 55℃; protection level IP67. Third-party testing and certification report provided.
• Optical cameras: One wide-angle camera each front and rear; resolution ≥ 8 million pixels.
• Ultrasonic sensors: One each left and right; supports obstacle recognition within 5 meters.
• Laser radar: One 192-line laser radar each front and rear; provides horizontal 360° and vertical 90° ultra-wide hemispherical FOV with coverage diameter ≥ 120m.
• Communication methods: Supports WIFI and radio frequency wireless communication; RF communication distance 500–1000 meters.

We provide comprehensive support from purchase through after-sales service, with professional guidance throughout the entire process.